* Pre-season Price |
5' x 10' x 16" -
$2099*
- MSRP -
$2187
3'3" x 10' (for
finger piers) - $1600
2'6" x 5' x 16" -
$785 |
Suction pockets on the bottom actually
"grab" the water to make our docks more
stable. |
Approx. 10% less than Manufacturers
Suggested Retail Price.
5' wide, more stable on the water.
Foam
filled, virtually indestructible.
10 Year
Warranty. Wave Armor dock is the simplest,
safest, and most user friendly floating dock
available. It’s foam filled so it floats no
matter what happens. It sits low in the
water (16”) and because of the unique
“suction” bottom is stable to walk on. Its
low profile and clean appearance makes it
the most aesthetically pleasing dock
available.
Foam
Filled, Virtually Indestructible, 10 Year
Warranty.
Never spongy, more stable in the water.
Never a worry about animal damage. It always floats.
|
|
H-Beam Connector Kits (2) The strongest,
most versatile connector in the industry.
Connects two 60" x
120" Dock Sections side-to-side.
- $320
Connects two
60" x 120" Dock Sections
end-to-end. - $199 |
The H-Beams slide into the channels of our
dock sections
to lock the docks together. The strongest
way to
connect floating docks. No unsightly
connectiors.
|
Our H-Beam connectors are the secret to our
clean appearance. The connectors are out of
sight and the dock seams blend perfectly. |
|
 Post Attachment Kit -
$265 (qty 2)
Fasten the dock to the lake bottom using
pier pipe. Easy to moor in mucky or bad
bottoms. The post attachment slides the
length of the dock. Find a section of good
bottom and move the attachment kit to that
spot. On quiet inland lakes some
installations only require two attachment
points every 20’. Rougher water requires
more attachment points. |
|
 7' Dock Ramp -
$1150
12' 8" Dock Ramp -
$1750
These tapered and hinged kits span from the
end of your dock to create a flush walking
surface from your shoreline. Available in 7′
or 12'8" foot long versions to meet your
needs. The ramp kit includes a hinge kit
that attaches the ramp to Wave Armor Dock.
The ramp usually angles down (for a beach)
but it can angle up about 30 degrees. |
60" Hinge to attach Ramp
to Fixed Dock - $915
This kit allows you to attach the PMI Dock
to a fixed dock. The
kit attaches to dock with the H-Beam and has
a steel plate that you attach to the other
style of dock. Use in deep water situations. |
Abutment Kit (attaches the ramp to a sea
wall)
7' - $445
12'8" - $445
Galvanized steel plate attaches to a
seawall. Three 6" galvanized steel arms bolt
to the bottom of the 7' or 12'8" Dock Ramp.
The ramp pivots on the three arms.
|
30" Corner Dock Section - $250
Fill corners where the dock comes together at
right angles.
|
40 " Half Round End Cap - $785
An aesthetically pleasing "finish" to your
Dock System.
Features a molded-in insert option |
40" 30 degree section - $460
60" 30 drgree section
- $610
Connects with molded in H-Beam Channels.
Sections create a 30 degree angle allowing
boat slips to fan out. 40” for finger docks.
60” for full size 5’ wide docks.
|
|
|
