Options for the
Otter Island Swim Raft
The Anchor and Mooring kit
are both FREE WHEN
PURCHASED WITH A NEW OTTER! |
|
|
|
Cushions for Otter Island
Lean-Backs $199
Pair of cushions (2), for the
Otter Lean Back.
Slides over
the seat back, secure with
Velcro straps. (TAN only)
Umbrella for the Otter
Island $179
Fold up umbrella fits into
the Otter table. (Tan only) |
Anchor $95
included FREE with purchase
of the Otter Island
10" tall x 26" round
Eye bolt for easy anchoring
all plastic construction |
MOORING KIT $134
included FREE with purchase of
the
Otter Island
Kit contains set of 2 clevis chains and bungees.
Securely moors Otter even in the
roughest water
from All Four anchor points. |
OTTER ISLAND STORAGE COVER
The Otter Island Storage
cover protects your Island
Swim Raft and Ladder during
off season storage.
Features a 600 denier
polyester, double
polyurethane protective
coating that is UV and water
resistant with buckles on
all 4 corners.
OTTER ISLAND Storage Cover
$129 with Free Shipping
TEMPORARILY OUT OF STOCK
|
|
What
you should know about the
Otter Island
The Otter Island swim raft is unique
from other rafts.
Polyethylene roto-mold
plastic construction filled
with closed cell foam. Virtually indestructible and
unsinkable. Water
rafts that aren’t foam
filled are subject to animal
damage or if punctured,
you’ll find them on the
bottom of the lake.
We say that the Otter Island
swim raft is
virtually indestructible
because we’ve had situations
where a boat has run into
the Otter Island swim raft and the Otter
Island was
still usable.
|
|
|
A critter chewed on
this but aside
from a
hole, which can be
repaired,
nothing
happened. The
raft didn’t
deflate or sink
and the
damage
wasn’t even apparent
until
winter storage time. |
Waterfront rafts are subject
to condensation inside the
body, or pontoon tube.
Foam filled floats
sometimes have gasses
released as the foam cures.
The Otter Island swim raft has drain plugs
which allow you to
eliminate built up
condensation and pressure.
Once a year at storage
time, simply open the drain
plug and condensation or
pressure is easily released.
Rafts without drain plugs
become heavier
over the years as water
accumulates with no release. |
|
|
|
When we designed the Otter
Island swim raft we knew that children
would love it. We
specifically looked at every
aspect of the design for
safety. Edges are
rounded and smoothed, we
actually run hands over the
finished product looking for
any burrs or sharp edges.
The boarding ladder is
rounded tubing (no edges)
and specially designed to
avoid any sharp edges or
pinch points. Our
children play on our
Otter Island swim raft and we insist on the
same safety that we want for
our family, for yours. |